Note: The speakers can be mounted on Bose brackets, table stands, or floor stands. Additional or longer cables may also be ordered. Page Making System Connections Note: If additional audio cables or longer cables are needed to make these connections, contact Bose Customer Service. Refer to the list of offices included in the product carton. Connecting the Acoustimass module to the media center Plug one end of the Acoustimass module cable into the Acoustimass Module jack on the rear of the media center Figure 6.
At the other end of the speaker cable, separate the left and right speaker cords as much as necessary to reach each speaker Figure 8. Figure 8 Separating left and right speaker cords 3. Unwind the wires for each antenna to provide the best reception. Figure 10 Antenna connections FM dipole antenna Before you proceed, you must determine if your TV has audio output jacks. To do this, you will need one additional video cable, which can be purchased at your local electronics store.
Page Vcr Considerations Figure For this connection you will need an S-video cable which can be purchased from your Bose dealer or a local electronics retailer. Note: For more information, or to purchase the video cables, contact your local electronics store or authorized Bose dealer. Nederlands Svenska Use an optical digital cable or a coaxial digital cable, as appropriate, to connect this output to the digital input on the media center. You can purchase the required cables at a local electronics store.
Con- nect the video output of the game console to the C composite Video IN jack. Figure 18 Game console connections Game console connection panel On the back of the remote, slide open the battery compartment Figure Page Connecting The Power Cord Figure 20 Connecting to power Note: Bose recommends using a safety agency-approved surge protector on all electronic equipment.
Voltage variations and spikes can damage electronic components in any system. A quality suppressor can eliminate the vast majority of failures attributed to surges and may be purchased at electronics stores. Be sure to perform step 4 and play the setup DVD. The setup DVD can help you verify that you set up your system cor- rectly for proper sound performance.
Requires special remote settings. The symbol defines the function. The markings define how the buttons are used. Control panel The media center has six buttons located on the top control panel.
Eject 2. On the media center control panel, press Eject to open the disc tray. If the system is off, the radio will turn on to the most recently selected station.
Tune to the preset station. Press and hold the 0 button on the remote until the media center display tells you that the preset is erased. Playing other sources Turn on any component connected to the media center by using the remote for that compo- nent or controls on the component front panel. For that purpose, each source you use with this system has its own Settings menu with features appropriate to that source. To view the settings menus You can see the Settings menu for each source on your TV screen Figure 24 and on the display panel of your media center Figure You can use the actions above to change back to the original default settings, too.
Do that if you do not like the effect of a change you have made, or accidentally made a change you did not intend. Then press Settings. Press Exit to remove the menu from the screen. There are no separate setting menus for these sources. If your system operates as you want it to, there may be no need for any changes.
In some cases, however, changes are required to make the system fully compatible with the installation options you have chosen.
Normal [default] Standard signal level loudness. Nederlands Svenska select navigate Description Media center display lights with a mid-range brightness. To activate this feature, you need to set a level of restriction and establish a password in the DVD Lock section of the System menu. Enter your four-digit password.
Using the down button, scroll down to Lock Discs Rated Above. Press the right arrow button to see the available settings.
Press the up or down arrow button to find the rating you want. Any current measured must not exceed 0. Reverse theunit power cord plug in the outlet and repeat test. Insulation Resistance Test Cold Check- 1 Unplug the power supply and connect a jumperwire between the two prongs of the plug.
When testing 3 wire products, the resistance measured to the product. If it is not within the limits specified, there is the possibility of a shock hazard,. To prevent warranty infractions,refer servicing to warranty service stations or factory service. It uses the same system concept of a console with adedicated bass module with TrueSpaceTMsignal processed surround sound from 2 satellite. MP3 disc tracks must be burned in a single closed session. Home Documents Bose service manual.
Post on Feb 1. Category: Documents download. Use the following checks to perform these measurements: A. When testing 3 wire products, the resistance measured to the product enclosure should be between 2 and infinite MOhms.
If it is not within the limits specified, there is the possibility of a shock hazard, and the unit must be repaired and rechecked before it is returned to the customer. It uses the same system concept of a console with adedicated bass module with TrueSpaceTMsignal processed surround sound from 2 satellite arrays. Bose - Power Amp Service Manual. Bose Service Manual.
0コメント